Switch show commands
[Back] Match them. Drag the correct grey box into the orange box.
# show spanning-tree interface fastethernet0/3
# show mac-address-table aging-time
# show spanning-tree vlan 1
# show mls qos maps cos-dscp
command produces: Spanning tree 1 is executing the IEEE compatible Spanning Tree protocol Bridge Identifier has priority 32768, address 00e0.1eb2.ddc0 Configured hello time 2, max age 20, forward delay 15 Current root has priority 32768, address 0010.0b3f.ac80 Root port is 5, cost of root path is 10 Topology change flag not set, detected flag not set, changes 1 Times: hold 1, topology change 35, notification 2 hello 2, max age 20, forward delay 15 Timers: hello 0, topology change 0, notification 0 Interface Fa0/1 in Spanning tree 1 is down Port path cost 100, Port priority 128 Designated root has priority 32768, address 0010.0b3f.ac80 Designated bridge has priority 32768, address 00e0.1eb2.ddc0 Designated port is 1, path cost 10 Timers: message age 0, forward delay 0, hold 0 BPDU: sent 0, received 0