CCNA

Cisco Router. Router. Cisco router (This is just a demo, and will be fully released soon).

1 Fundamentals

CCNA (Introduction)
CCNA1. CCNA Test 1. Network Fundamentals.

2. Network Models

CCNA2. CCNA Test 2. Network Models.
Hex/Binary. The activity involves converting hex, binary and decimal into other number formats.
IP The activity involves converting an IP address into its displayed format.
Layer The activity involves draging the definition for the data at each layer onto the correct OSI layer.
Protocol The activity shows some of the key networking protocols and how they fit into the OSI model.
Layer In this demo the name used to refer to each layer is defined.
Test. Binary to IP. Binary to IP.
Test. Hex to IP. Hex to IP.

3. IP

CCNA3. CCNA Test 3. IP.
[IP Network/Host Address]. Enter an IP address and a subnet mask, and the page will calculate the host and network part.
[IP Subnets]. Enter an IP address and a subnet mask, and the page will calculate the first few subnets.
[Max subnets]. Enter an IP address and a subnet mask, and the page will calculate the maximum number of subnets.
IP Classification Test 1. IP Class. This is a simple test which generates a range of IP addresses, and you must determine the IP address classification.
IP Classification Test 2. IP Class. This test provides an address classification, and the user must find the addresses which are of this classification
IP Classification Test 3. IP Class. This test provides an address classification, where the network part of the address is determined
IP Test. IP Subnet. Find an address which is on a given network. Find an IP address on a network, for a given network address and subnet mask.
IP Test. IP Subnet. Find an IP address on the same network. Find an IP address on the same subnet.
Subnet Test 1. IP Subnet. Subnet Test.
Subnet Test 2. IP Subnet. Subnet Test.
Subnet Test 3. IP Subnet . Find the nth usable subnet. This test involves finding the nth usable subnet.
Subnet Test 4. IP Subnet. Maximum subnets. This is a test page to determine the maximum number of subnets and hosts/subnet for IP classed addressing.
Subnet Test 5. IP Subnet. Maximum host/subnet. This is a test page to determine the maximum number of hosts per subnet.
Subnet Test 6. IP Subnet. Determine the required subnet mask for a given number of subnets. This is a test page to determine the required subnet mask for a given number of subnets and a given IP address classification.
Subnet Test 7. IP Subnet. Determine the required subnet mask for a given number of host/subnet. This is a test page to determine the required subnet mask for a given number of hosts per subnet and a given IP address classification.

Unit 4 - Router Challenge

[Challenge 1]. This challenge involves the configuration of the E0 port on a router.
[Challenge 2]. This challenge involves the setting up the serial port parameters.
[Challenge 3]. This challenge involves the configuration of the name server, user names and passwords.
[Challenge 4]. This challenge involves the configuration of the interface ports.
[Challenge 5]. This challenge involves the configuration banners and the HTTP server.
[Challenge 6]. This challenge involves the setting of logging, the clock and HTTP settings
[Challenge 7]. This challenge involves the configuration of the S0 port on a router.
[Challenge 8]. This challenge involves the configuration of the S1 port on a router.
[Challenge 9]. This challenge involves the configuration of the boot and clock settings.
[Challenge 10]. his challenge involves the showing some router details.
CCNA4. CCNA Test 4. Cisco Devices.

Unit 5 - Router Management

[Challenge 1]. This challenge involves the configuration of CDP and the default gateway.
[Challenge 2]. This challenge involves the configuration of CON and VTY settings.
[Challenge 3]. This challenge involves the showing some router details.
CCNA5. CCNA Test 5. Router Management.

Unit 6 Introduction to the Cat switch

[Challenge 1]. This challenge involves the configuration of ethernet port settings and CDP.
[Challenge 2]. This challenge involves the configuration of the Ethernet ports.
[Challenge 3]. This challenge involves the configuration of passwords, and usernames
[Challenge 4]. This challenge involves the configuration the host table, hostname and default gateway.
CCNA6. CCNA Test 6. Basic Switching.

Unit 7 - Intro to WANs

[Challenge 1]. This challenge involves the configuration of the S0 port on a router.
[Challenge 2]. This challenge involves the configuration of the S1 port on a router.
[Challenge 3]. This challenge involves the configuration of frame relay.
[Challenge 4]. This challenge involves the configuration of frame relay.
[Challenge 5]. This challenge involves the setup of authenticated routing protocols with EIGRP.
[Challenge 6]. This challenge involves the configuration of a NAT.
[Challenge 7]. This challenge involves the configuration of dynamic NAT
[Challenge 8]. This challenge involves the configuration of dynamic NAT.
CCNA7. CCNA Test 7. Intro to WLANs.

Unit 8 Wireless LANs

CCNA8. CCNA Test 8. WLANs.

Unit 9 Basic Security

[Challenge 1]. This challenge involves the configuration of the S0 port on a router.
[Challenge 2]. configuration of a local AAA
[Challenge 3]. configuration of security of a router.
[Challenge 4]. the configuration of services on the router.
[Challenge 5]. the console/telnet timeout on switch .
[Challenge 6]. the console/telnet timeout on switch
[Challenge 7]. Passive RIP
[Challenge 8]. RIP Authentication
[Challenge 9]. Logging
CCNA9. CCNA Test 9. Basic Network Security.

Unit 10 Basic Routing

[Challenge 1]. This challenge involves the configuration of RIP.
[Challenge 2]. This challenge involves the configuration of a static route
[Challenge 3]. This challenge involves the configuration route redistribution for static routes.
[Challenge 4]. This challenge involves the configuration of RIP.
[Routing Table]. This shows how the routing is created from connected devices.
CCNA10. CCNA Test 10. Basic Routing.

Unit 11 Small Office

[Challenge 1]. This is a challenge configures some simple details on the SDM.
[Challenge 2]. This is a challenge configures some simple details on the SDM.
[Challenge 3]. This is a challenge configures some simple details on the SDM.
CCNA11. CCNA Test 11. Small-Office Internet Office.

Unit 12 Adv. Cat Switch

[Challenge 1]. This challenge involves the configuration an IP address on a VLAN.
[Challenge 2]. This challenge involves the configuration of the console password and to enable the HTTP server.
[Challenge 3]. This challenge involves the configuration of the VTY server and SNMP settings.
[Challenge 4]. This challenge involves the configuration of a hosts table.
[Challenge 5]. This challenge involves the configuration of ethernet port settings and CDP.
[Challenge 6]. This challenge involves the configuration of VLANs.
[Challenge 7]. This challenge involves the configuration of switchport access parameters.
[Challenge 8]. This challenge involves the configuration of timeouts for the console.
[Challenge 9]. This challenge involves the configuration the clock, boot system and DHCP pool.
[Challenge 10]. This challenge involves the configuration of the Ethernet ports.
[Challenge 11]. This challenge involves the configuration of passwords, and usernames.
[Challenge 12]. This challenge involves the configuration of switchports.
[Challenge 13]. This challenge involves the configuration the host table, hostname and default gateway.
[Challenge 14]. This challenge involves the configuration of logging.
[Challenge 15]. This challenge involves the configuration of the HTTP server and in creating banners.
[Challenge 16]. This challenge involves the configuration of the clock and boot settings.
[Challenge 17]. This challenge involves the configuration of the DHCP server.
[Challenge 18]. This challenge involves the configuration of services on the device.
[Challenge 19]. This challenge involves the configuration of a range of ports.
[Challenge 20]. This challenge involves the setting of logging and HTTP settings.
[Challenge 21]. This challenge involves enabling port security and the BPDU guard (to defined against spanning-tree attacks).
[Challenge 22]. This challenge involves defining the scope of broadcast domains.
CCNA12. CCNA Test 12. Advanced CAT Switch.

Unit 13 Security

[Challenge 1]. This challenge involves the configuration of a standard ACL.
[Challenge 2]. This challenge involves the configuration of a standard ACL.
[Challenge 3]. This challenge involves the configuration of an extended ACL.
[Challenge 4]. This challenge involves the configuration of named ACLs.
CCNA13. CCNA Test 13. IP Access Lists.

Unit 14 Routing

[Challenge 1]. This challenge involves the setup of authenticated routing protocols.
[Challenge 2]. This challenge involves the configuration of a passive interface with EIGRP using a distribute-list.
[Challenge 3]. This challenge involves the creation of policy-based routing.
[Challenge 4]. This challenge involves the configuration of two-way route redistribution.
[Challenge 5]. This challenge involves the configuration of the redistribution of connected routes.
[Challenge 6]. This challenge involves the configuration of the redistribution of routes using the default-metric command.
[Challenge 7]. This challenge involves the configuration of OSPF.
[Challenge 8]. This challenge involves the configuration of the redistribution of routes.
CCNA14. CCNA Test 14. Routing.

Unit 15 Advanced Routing

CCNA15. CCNA Test 15. Advanced Routing.

Advanced IP

CCNA16. CCNA Test 16. Advanced IP.

Final Tests

CCNA Full. CCNA Test Full. Final Test.
CCNA Complete. CCNA Test Full. Final Complete.
CCNA Fun test. Fun Test. CCNA Fun test.
Cisco Academy CCNA Test 1. CCNA Full. Final Test.
Cisco Academy CCNA Test 2. CCNA Full. Final Test.
Cisco Academy CCNA Test 3. CCNA Full. Final Test.
Cisco Academy CCNA Test 4. CCNA Full. Final Test.

Additional

[Challenge 1]. This challenge involves the configuring IPv6 on interfaces.
[Challenge 2]. This challenge involves the configuration of NAT overload.
[Challenge 3]. This challenge involves the configuration of NAT overload without an address pool.
[Challenge 4]. This challenge involves the configuration of TCP load distribution for NAT.
[Challenge 5]. This challenge involves the configuration of NAT for overlapping networks
[Challenge 6]. Router-on-a-stick.